LEAD PAINT REMOVAL HEPA VACUUM

LEAD PAINT ABATEMENT

HEPA Lead Paint Vacuum For EPA RRP Contractors

Lead Sucker HEPA Filter  Vacuum

EPA RRP Contractor Vacuum

Lead Paint Vacuum HEPA Certified

 

510-885-0197

Important Notice: Free Download (go to store area under downloads) of New EPA Enforcement & Penalty Guidelines MUST READ

World's Best HEPA Vacuum For Lead Paint Removal

Designed For Contractors

  EPA RRP Compliance

 

 

30LBS - 25" High -16" Diameter -Industrial Grade-124 cfm -87" of Lift

If You Are Not Using The Lead Sucker HEPA Vacuum On Your Job Site You Are Risking Your Entire Business  Here's Why...

If You Have Another Vacuum Throw It Out Now !

 

ORDER HERE PRICING INFORMATION

**************************************************

10 Major Points To Consider Immediatley

 

 

1. Designed Specifically For Hazardous Waste Removal For Contractors

This is not your mom's house vacuum.  The full design of this vacuum was for commercial use, by contractors, for removal of fine dust/particulate matter designed around a HEPA certified filter system. In fact, each primary HEPA filter in our system comes with its own unique serial number. The Lead Sucker captures 99.97% of dust particles .3 micorons and larger. Many HEPA vacuums are remakes of shop vacs, or worse yet shop vacs with an add on HEPA filter  (bad news). The Lead Sucker is purpose designed. There are so many unique and purpose designed technical features of this vacuum that it puts all others to shame. If you want a bit more technical information...read way..hear it is.

 

 The first stage of filtration uses our easy to install twist on Hepa rated H-13 filters. The 2nd stage filtration uses a pre-installed Hepa certified IEST RP-CC001.4 filter that has undergone testing and is serialized, labeled and certified to eliminate 99.97% of dust particles @.3 micron at a flow rate of 124 cubic feet per minute. Our patent pending H-13 HEPA compliant filters are lightyears ahead of the competiton...giving you the best filtration system on the market.

 
2. Designed For Dustless Tools

All vacuums are not designed equally..blah blah blah. Fact: Our vacuum will outshine performace wise in the continous use of hooking up your Lead Sucker to sanders, grinders, etc.  EPA regulations require that any power tools that disturb lead paint surfaces be hooked up to a HEPA vacuum.The Lead Sucker was designed for general job site clean up and collecting dust and debris generated from hand held tools that sand, cut, and grind.   If you look at the technical data , most vacuums will start out at about the same point  (Sucking Power =  CFM's and inches of lift). However after 5 to 30 mins of use all others start loosing Sucking Power because the filters start to clog up. Our system, with our exclusive HEPA No-Clog continues on at pretty much the same performance level it started at. Translation...you get to keep working, the job site stays clean, and you don't have to mess with filters or the vacuum in the middle of your job. Just think about this one for a minute....It's a hard fact on our end.

3. Exclusive HEPA No-Clog  Technology Saves You Thousand$$ of Dollars Every Year

 

HEPA No-Clog   Patented Exclusive Automatic Filter Cleaning System

 

Our exclusive system automatically flushes the filters clear of dirt and debris allowing prolonged use without clogged filters. No other vacuum on the market can do this !  And what's the importance of this ? Very simple. Most other vacuums on the market will end up costing you $500 - $3,000 per year to operate with replacement filters. Typical HEPA vacuums clog up pretty quickly because of the fine filtration requirements...but our Lead Sucker shakes off the problem by automatically clearing dirt and debris off the filter automatically during operation. Our negative gravity debris management system also keeps dirt and debris at the bottom of the canister leaving more room for fresh debris and eliminating the same debris from coming back up in to the filter.

The "I'm Screwed It's Clogged Problem": Think about this one...you or your workers are chugging along using the HEPA vacuum..it begins to slow down..just does not have the sucking power it did when you first turned it on. Now you go over and start smacking the vacuum to try to "free up the filter"  ( oh you never did this ?? ). It still does not operate properly. Ok, the smart thinkers will have the vacuum open and start trying to "clean the filter".  Gee the hazardous lead waste that forced you to by a HEPA vacuum and make sure you and your workers are protected, is now getting back all over you and the job site. The job site is freshly contaminated with concentrated lead dust...and so are you.  Forgettng all that, once you figure out the HEPA filter is clogged...and you need a new one...now you are stuck. Oh you don't have a spare on the truck...too bad.  Now you have to go order a filter ! Sorry these will not be a Home Depot Item. Your job site is shut down, you have wasted lots of time, and you have lead dust all over the place again. Oh..and typical HEPA filters cost  $90 to $240 to replace. We know for a fact of renovators that have (oops "had")  the other guys vac and were spending over $200 per month on replacement filters.

The other major factor...your lost time. Did you know that with many vacuums they actually instruct you to stop the machine every 15 minutes or so to perform some type of cleaning function ? For real. Our caluculations show clearly that a $12/hour person messing with this will end up costing the business about $1,200 - $2,000 per year. Add on overhead and all the other stuff (benefits, workers comp, etc) and the number is much more. You don't have this issue with the Lead Sucker !   Oh..and throw in the lost time actually changing the filter, chasing replacement parts...and you have a true "hidden cost" of owning the other machine... $3,000+  per year when you factor in replacement filters and lost time. But forgetting all that, you still have the huge liability problem caused by the other vacuums.  Lead Sucker takes away these issues. Our HEPA No-Clog system is the magic. It's that simple.

 

With the Lead Sucker  YOU WILL NOT HAVE THIS PROBLEM ! In fact you will be lucky if the typical renovation contractor will replace our HEPA filter once (as in 1x)  per year !

4. HEPA No-Clog Technology Dramatically Reduces Your Liability (And Why You Are At Total Risk With Other Vacuums)

 

Ok..let's get to some very serious stuff. The new EPA regulations have dramatically increased the liability for all contractors. In fact, the new regulations that require closing off areas being worked on, and containing all lead dust, and then collecting it in one container (the HEPA vacuum) creates a ticking time bomb. If your vacuum cloggs, and you go through the "I'm Screwed It's Clogged Problem" as described above, you have just dramatically increased your risk of job site and human (you, your workers, vistors ) contamination. Lead levels could sky rocket in minutes while trying to clean a vacuum/filter. If you the owner are not there to supervise, a clogged vacuum will result in a person opening up the vac, smacking the vac/filter to "unclogg" it...and thorougly contaminate everything around. This is guaranteed to happen 9 out of 10 time when you are not around. Can you afford this liability ? Our guess is that no contractor can considering fines can be $37,500 per day and homeowners can sue you 7 days a week (sad but true..no break on Sunday's).

With the Lead Sucker HEPA No-Clog system...this scenario is eliminated..along with the massive liability issues. Why would you consider anything other than the Lead Sucker on your job site ? In fact, you will know all is under control when your workers say "get me the Lead Sucker" instead of "where's the vacuum" . The Lead Sucker is the only HEPA vacuum on the market that can give you this assurance.

5. Made For Contractors To Address EPA RRP Regulations

Right out of the cat's mouth....EPA requiremetns for HEPA vacuums:

"HEPA vacuum means a vacuum cleaner which has been designed with a high-efficiency particulate air (HEPA) filter as the last filtration stage. A HEPA filter is a filter that is capable of capturing particles of 0.3 microns with 99.97% efficiency. The vacuum cleaner must be designed so that all the air drawn into the machine is expelled through the HEPA filter with none of the air leaking past it."

Lead Sucker was designed for these filtration requirements. Our final stage HEPA filter is considered one of best in the industry, fully certified as HEPA compliant, and each HEPA filter is individually serialized for quality control.

Lead Sucker= EPA HEPA Vacuum Compliance

 
6. No Nonsense Satisfaction Guarantee

Fine Print:

Buy the Lead Sucker. Use it for 5 days. If its not everything we say it is, return it in the original carton in good  clean working condition. Your money will be refunded if you elect to do this. Here is the fine print: Buy the Lead Sucker. Use it for 5 days. If its not everything we say it is, return it in the orignal carton in good clean working condition. Your money will be refunded if you elect to do this.

7. The Problem You Have To Solve

Look, you have a business to run. Contracting is already difficult enough..we all know that. The HEPA vacuum is the single most important piece of equipment you will purchase for EPA RRR Lead Paint Compliance. Why mess around. Lead Sucker is brought to you by a licensed California contractor. We know the issues. This is straight  from us to you, another fellow contractor. Get the Lead Sucker today. This is not the place you want to have problems. We are all going to have to really figure out operationally what all the new rules are really going to mean on a day to day basis.  But one thing is clear..lead containment, abatement, and management is a very serious issue with huge cost and liability issues for all contractors. Put the HEPA vacuum issue to sleep...get the Lead Sucker.  Our promise...when you buy our vacuum,use it, and see and hear (we will leave this part for you to experience when you actually use our vacuum..the HEPA No-Clog actually makes a very distinct sound as it cleans the filters) it in action, you will be sold forever. It's that simple. That's why we have the No Nonsense Guarantee.  Are you getting the picture ?..We are behind this 100% for a very good reason. It works.

 

8. The Problem With Other Vacuums

We have been through this. Cost, down time, liability. Enough said.

 
9. Don't Believe Us..Just Listen To Others

The testamonials keep pouring in. We hope you will take the time to send in a brief note..by email or snail mail. Also, please send us pictures of the Lead Sucker in action ! Special gifts and awards are going out for the most interesting/creative pictures and stories.  We are looking for funeral pictures of your old vacuum once you get the Lead Sucker :)

 

10. We Are Going To Help Make Your Life Easier

 

We have a number of other products that will make your life easier with regards to the new EPA Lead Paint Regulations. Join our growing list of customers. Our customers will be the first to know about some exciting, and much needed items to help address daily management of EPA compliance.

We look forward to having you as a customer.

 

Order Here

Questions ?  Call our office at 510-885-0197

 

 

 

Lead Sucker and HEPA No-Clog are trademarks of Golden Gate Enterprises, Inc. All rights Reserved. All material on the website is copyrighted and no permission is granted to copy or reuse any information on this site without written permision. 2010  Golden Gate Enterprises, Inc.